|
Advanced sound systems since 1999
|
|
|
|
|
LA-series Professional Power Amplifier System |

|
|
LA系列是一款高效率H类线路的功率放大器,H类放大线路特点是提高效能和增大峰值功率,该系列将先进的科技应用H类线路设计;我
公司经过长时间的研究、开发,综合众多国外著名产品的优点,汇集低预算和对耐用性、灵活性及高品质声音专业的要求,结合长久的现
场检测,推出此款全对称功放系列;
良好的方波响应和极低的相移,4欧姆的超强负载能力;
延时开机“软启动”功能,闭环控制的自适应限幅器及过热、直流输出、短路保护;
散热系统采用美国国家半导体公司专用精密温度传感器,实施高效智能温控强制散热,使功放长期保持在常温的工作状态;
高钢性整体互联机箱底盘,4mm超厚高强度铝合金面板,标准外观尺寸;
高速、宽频和全开放式的输出晶体管,高频输出更加通透、清晰;
可控开关极平滑,在高、低两者之间的渐变电压得到极好地控制;
有效降低失真、输出部分适合长期使用,致使功放长久耐用;
适合高标准、严要求的巡回流动演出和封闭的、阴暗潮湿的工程固定安装系统,稳定性、可靠性高,适用性、表现力强,频响宽、失真低;
优质进口阻焊绿油,高强度双面PCB线路板
各通道均采用独立供电模式
LED指示灯(每路):削波及限幅、信号输入、过热及直流保护、电源
电子线路保护(DC、过热、短路、电流限幅)
高品质的电容储备
双固定、高磁通率环形变压器
软启动开关及关机功能
电压限制、削波限幅功能
开关转换立体声及单声道、机箱外壳接地与短开模式
前面板式增益控制,温控变速风扇散热
保护系统:峰值限幅器、软启动、过热保护、短路保护、
直流输出保护、次声波输入保护
桥接模式:A路正位正输出,B路正位负输出
输入插头:母佧侬座
连接插头:平衡直插座
输入连接器(每路):阴性XLR插座一对,TRS直插一对
输出连接器(每路):两对输出接线柱
输出端子:接线柱
输出模式:立体声/桥接/并联
悬浮/接地开关
|
| |
LA系列专业功放 |

|
|
LA-series Professional Power Amplifier System
LA series is a kind of power amplifier with high efficient H series circuit. The character of H series amplified circuit is that it canenhance potency and the peak power. This series product adapts advanced scientific design- H series circuit; Our company have integrated many advantages of various famous brands with our longtime research and development. We launch these new holohedralsymmetry amplifiers which reach the requirements of low cost, high durability, flexibility and high quality, and it has suffered long time living test.
Good square-wave response and super low phase shift, 4 Ohm super load capacity;
The function of soft start with turn-on delay, self-adapting limiter with closed-cycle control and protection of over-heat, direct-current output and short circuit;
The cooling system adapts the appropriative exact temperature sensor from American National Semiconductor Company which canforce cooling by intelligence and efficiency to ensure the power amplifier to work under the normal temperature.
The high-rigidity whole-interconnected chassis adapts 4mm super thick and high-strength alufer panel with standard outline dimension.
The high-speed and wideband output transistor can make the HF output much more transparent and clear.
The super smooth controlled switch can well control the voltage gradient between the high frequency and low frequency.
It can reduce the distortion efficiently, and the output part can work for long time to make the power amplifier durability.
No matter for the high and serious requirements tour-living show or for fixed programmed installation in the closed, dark and wet environment, it can also perform its characters with steady and durability, high applicability and property as well as wide frequency response and low distortion.
High-quality imported resistance welding green oil, high-strength double-sided PCB Each module adapts independent power supply mode.
Electronic protection circuitry (DC, over-heat, short circuit and current limiting)
High-quality capacitor storage.
Double fixed and high magnetic flux toroidal power transformer
Soft-start switch and turn-off function.
Voltage limiting and clipping limiting function Switch for stereo and mono mode. Chassis connecting grounded mode and short-open mode.
Front panel voltage gain control and temperature of cooling fan.
Protection system: peak limiter, soft start, over-heat protection and short-circuit protection, direct- current output protection and infrasonic input protection Bridged mode: A circuit is positive output, B circuit is negative output.
Input plug: female XLR
Connecting plug: balanced inset socket
Input connector (each module): a pair of female XLR socket and TRS inset plug
Output connector (each module): a pair of output binding post Output terminal: binding post
Out put mode: stereo sound/bridge/series connection LED instructing light (each module): clipping and limiting, signal input, over-heat protection, direct-current input protection, power supply, ground-lift switch.
|

|
| |
|
|
AMPLIFIER POWER RATINGS AND SPECIFICATIONS |
|
|
LA-800 |
LA-1200 |
LA-1800 |
LA-2000 |
LA-2400 |
8 Ω Stereo Power(RMS)
8欧姆输出功率 |
250W |
350W |
500W |
700W |
1000W |
1200W |
4 Ω Stereo Power(RMS)
4欧姆输出功率 |
280W |
450W |
750W |
900W |
1800W |
2000W |
8 Ω Bridged Power(RMS)
4欧姆桥接输出功率 |
560W |
900W |
1350W |
1680W |
3000W |
3600W |
Frequency Response
频率响应 |
20Hz-20kHz;+0.1/,3dB(1W/8Ω) |
THD into 4Ω, 1KHz
功率带宽(4欧姆符带额定功率,1KHZ) |
<0.05% @ 280W |
<0.05% @ 450W |
<0.05% @ 750W |
<0.05% @ 900W |
<0.05% @ 1800W |
<0.05% @ 2000W |
SMPER IMD
互调失真 |
<0.01% @ 250W into 8Ω |
<0.01% @ 350W into 8Ω |
<0.01% @ 500W into 8Ω |
<0.01% @ 700W into 8Ω |
<0.01% @ 1000W into 8Ω |
<0.01% @ 1300W into 8Ω |
Slew Rate
瞬态率 |
20V/ us |
20V/ us |
25V/ us |
25V/ us |
28V/ us |
30V/ us |
Damping Factor
阻尼因数 |
200:1, 1kHz @ 8Ω |
200:1, 1kHz @ 8Ω |
300:1, 1kHz @ 8Ω |
300:1, 1kHz @ 8Ω |
400:1, 1kHz @ 8Ω |
400:1, 1kHz @ 8Ω |
Input CMRR(@ 1KHz)
输入共模抑制比(1KHz) |
>60dB |
>60dB |
>60dB |
>60dB |
>60dB |
>60dB |
Voltage Gain
电压增益 |
58x standard |
68x standard |
81x standard |
92x standard |
108x standard |
116x standard |
INPUT Sensitivity(@8Ω)
输入灵感度 |
0.775V(1.0V,1.4V ) forrated power |
INPUT Impedance
输入阻抗 |
20K Ωs,balanced 10K Ωs,unbalanced |
Hum and Noise
信噪比 |
-95dB |
Crosstalk
通道串音 |
>60dB |
Connectors(per channel)
输入连接器(每路) |
Female XLR(pin2+),TRS(tip+),5-way Output binding posts,Speakon |
Power Supply
电源供应 |
220V-240V/50Hz-60Hz |
Cooling
散热 |
Tow(2) variable speed DC fans |
Controls
控制装置 |
2 front panel attenuators, rear panel signal ground lift jumper |
Indicators(per channel)
指示器(每路) |
PROTECT LED, CLIP LED. SIGNAL LED. POWER LED. |
Protection
保护系统 |
Temperature, DC, sub/ulfea-sonic, short Circuit, IGM, output |
Max. Current Draw 230V
最大电流230V |
8A |
10A |
15A |
20A |
25A |
30A |
Dimensions (H W D)
外型尺寸 |
88*483*396mm(2U) |
88*483*396mm(2U) |
88*483*486mm(2U) |
88*483*486mm(2U) |
132*483*532mm(3U) |
132*483*532mm(3U) |
Gross Weight
毛重 |
14.5kg |
15.8kg |
20.1kg |
23.5kg |
32.5kg |
35.5kg |
Net Weight
净重 |
12.5kg
|
13.8kg |
18.1kg |
21.5kg |
29.5kg |
32.5kg |
|

|
| |
| |
|
|